Leave Your Message
Products Categories
Featured Products

Lamella Clarifier for waste water treatment

Lamella clarifier inclined plate settler (IPS) is a type of settler designed to remove particulates from liquids.

They often employed in primary water treatment in place of conventional settling tanks. The inclined tube and inclined plate precipitation water purification method is formed by placing the sludge suspension layer above the inclined tube inclined plate with an inclination angle of 60 degrees, so that the suspended matter in the raw water accumulates on the bottom surface of the inclined tube. After that, a thin mud layer is formed, which slides back to the mud slag suspension layer after relying on the action of gravity, and then sinks into the mud collecting bucket, and then is discharged into the sludge pool by the mud discharge pipe for treatment or comprehensive utilization. The clean water above will gradually rise to the water collection pipe for discharge, which can be directly discharged or reused.

    Features

    1. Maximized sedimentation area within limited footprint.

    2. High-rate clarifier for high SS water (grit, clay, lime & mental particals).

    3. Circular sludge hopper with sludge scraper to reduce total transportation height.

    4. Indoor or outdoor layout (environmental temperature should be over 0°C). 

    5. Apply to automatic & continious operation.

    6. Design life: Carbon steel material: >10years; Stainless steel material: >20years. 

    Lamella-Clarifier-3h60

    Advantage 

    Higher efficiency, smaller footprint

    Inclined plates extended to 1.5m,separation efficiency improved (higher 1.5 ~ 2.0 times) comparing with radial flow clarifier and vertical clarifier and save 80% of area.

    Excellent hydraulic conditions

    No hydraulic corner and vortex, better precipitation performance.

    Inclined plates Chokeless

    Plates are of angle 60 degrees, spacing between 80 ~ 100 mm, back-washing device used.

    Strong and durable

    Inclined plates are breakless, collapseless.Adopt 6mm hard PVC board or 8 mm high quality PP board as special separation plate, module embedded installation, high strength, easy disassembling and maintenance.

    Sludge discharge smoothly 

    No dead angle, sludge pump is recommended.